How to Install Led Strip Lights

LED strip lights are at once one amongst the foremost popular and alluring parts of decorations for many occasions. As LED strips are available in several lengths, colors, and sizes, it’s easy to induce on the proper kinds of the LED strips for your specific requirement. Also, LED strip lights to make an excellent lighting and illumination effect if the sunshine is reflected from a flat surface which makes it an ideal choice for decorative application.

Handling LED strip/rope lights are very easy and it will be performed with do it yourself knowledge or  without having any professional help. Today, we are going to be probing the entire procedure of putting in new LED strip lights. we are going to also include some additional information like splitting one LED strip, Merging multiple LED strips, and using an RGB controller for the LED lights to form it a helpful guide for everybody.


Powering The LED Strip Lights
Connecting Multiple LED Strip Lights To
Single Power Source
How To Install LED Strip Lights?
Is It Possible to interrupt LED Strip Lights?
Coupling LED Light Strips Together
RGB Connection & Control For LED Strip Lights
Connecting LED Strip Lights serial

Powering The LED Strip Lights

If you bought only an LED strip reel, some changes haven’t arrived with proper wiring within the box and you’ve got to try to to it yourself. With some a compatible driver and basic wiring, you’ll be able to get this finished with ease. Follow the steps provided to help guide you to power your LED strip lights.

First, you should carefully unpack all components within the package, including the LED strip light reel.
Then, you’ll need to connect the LED strip to the connector. Here, you’ll find a red and a black cable inside the connector.

Connect the red cable with the “+” terminal of the LED strip and black wire to the “-” terminal.
Once the wires are properly connected to each other, then simply push the rear side of the connector inwards to make sure it secures the connection.

The other side of the connector must be connected to an appropriate driver to power the LED strip light.
led strip light power supply.

Connecting Multiple LED Strip Lights To

Single Power Source

In most cases, you may need a protracted strip of LED lights to hide a bigger area. If you wish to hide the periphery of a wall or an oversized desk, you would possibly not find one strip of LED that’s long enough to hide it properly. In such situations, you’ll need to connect multiple LED strips. If you want to attach them to one power source, here’s the way to have it off.

A single power adapter is capable of powering two led strip/rope lights comfortably or some brands can do more LED light strips simultaneously. But to be ready and sure to connect multiple LED strip lights to one adapter, you’ll need a two-way power-splitter first just in any case of an overload you can simply split.
Once you get your hands on a good power splitter, ensure that the sunshine strip wattage doesn’t exceed the whole output capacity of the adapter itself.

Once you’ve got confirmed the compatibility of the adapter and splitter, simply connect the LED strips to the splitter.
Connect the end of the splitter to the ability adapter directly so that the plugged into the AC electric outlet.
connect multiple led strip/rope light to single power supply.

Click Here to understand Battery-Powered LED Strip Lights

How To Install LED Strip Lights?

LED strip lights are linear in design as compared to other lighting equipment and very compact. This makes LED strip lights the fore more versatile option when it involve installation. you’ll easily be able to install an LED strip/rope light over any flat surface and with no directional constraints.

The LED strip lights also are lightweight. this enables you to stay the LED light strip to any surface without concern about it slack eventually. you’ll be able to install LED light strips behind a TV, under the cavity of drop-down ceilings, or below the furniture placed over the table in your kitchen.

Most LED strip lights include pre-applied adhesive on the rear which is roofed by a protective film. Simply pull the highest film aloof from the strip and you may be ready to stick the LED strip lights directly. Alternatively, you’ll use 3M double-sided tape to confirm a firm grip on the rear side of the LED light strip. However, you must not cover the front portion of the LED strip light with tape because it can ruin the lighting effect by covering several LED lights present on the strip.

Is It Possible to interrupt LED Strip Lights?

If you’ve got purchased a significantly longer LED light strip compared to your requirement and will not manage to suit the entire strip, you’ll must cut it to a specific length. Cutting an LED strip light is incredibly easy. Hence, it must be done carefully so you don’t accidentally damage the LEDs on the strip.

If you observe the LED strip lights carefully, you’ll find dedicated cutting markers on the strip. Normally, you may find these markings in every 3 or 6 LED lights on a strip/rope light. Once you chop the LED strip, you may find exposed copper pads on both ends of the section that may allow you to reconnect the strip to the identical or different power source. Breaking the LED light strip in pieces also will allow you to put in the lights at an angle or allow sharp activates the walls or ceiling.

Is It Possible to interrupt LED Strip Lights

Coupling LED Light Strips Together

Connecting different LED strips of the led strip lights, facilitate your to put in the LED lights in the difficult angles and corners. the most effective advantage of connecting different LED strips is that the 90 degree turns which is most ordinarily needed when installing LED light strips on walls or ceilings. If you want to couple multiple LED light strips together, here’s a way to do it:

If you want to attach LED light strips/rope easily, you would like to urge the fast solderless connectors available within the market currently. These connectors will allow you to attach LED light strips without much effort.
If you’ve got a quick solderless LED connector, simply remove the lock pad present on the connector.
Then, peel a touch little bit of the covered section on the LED strip to reveal the adhesive side of the strip.
After that, you’ll directly insert the sunshine strip into the fast connector. While doing so, confirm that the copper pads on the strip align with the conductor pins of the connector.
Once it’s well aligned and well connected, close the lock pad of the connector.
Coupling LED Light Strips Together

If you are doing not wish to induce a solderless connector, you’ll have to manually solder the connections between the LED strips. This process must be performed with extreme care and precision as wrong soldering can damage the LED strip.

RGB Connection & Control For LED Strip Lights

One of the foremost used LED light strips is RGB that permits many alternative color options for the sunshine output. together with different colors, Multicolor RGB LED light strips also include a fervent multicolor RGB controller that has predefined modes for the lighting effect. These modes are suitable for special occasions where you wish to introduce additional effects within the lighting area.

The RGB connectors are included together with the RGB LED light strips. Here’s how you’ll be able to connect the controller with the LED light strip:

RGB LED strips have a better number of terminals as compared to regular strips and that they are indicated by the symbols “+”, “G”, “R”, and “B”.
You will get similar terminals on the RGB controller included with the multicolor RGB LED light strip.
To connect the controller with the strip, you would like to easily connect the identical terminals of the RGB connector and LED strip.
Then, we want to attach the RGB connector directly with the ability supply with the assistance of power cables or a DC connector.
If your multicolor RGB controller includes a 4 pin connector that are suppose to be pre-installed on the device, you would like to easily be insert the connector within the strips, and you are done.

Multicolor RGB Connection & multicolor RGB Control For LED Strip Lights

Connecting LED Strip Lights asynchronous

LED light strips/ropes are designed in such way that you just can connect them together and make a singular lighting strip consisting of your requirements. But, if you want to attach multiple LED light strips together, you need to connect them nonparallel. This way, you’ll be able to confirm that the LED light strips are protected against sudden voltage surges still as fall.

To connect multiple LED strip lights serial, you may need to introduce an additional component within the circuit which is an LED amplifier.
Let us consider multiple RGB LED strips have to be connected asynchronous to one source and controlled by one RGB controller. Here, you may require an LED amplifier for every strip of LED except the primary one.
In the first place, connect the RGB controller with the primary strip and power supply by following the steps provided within the previous section.

After that, you may must connect an LED amplifier to each individual LED strip. The LED amplifiers for RGB LED strips even have identical terminals as available on the strips.
Once all of the LED amplifiers are connected with the led strips, you will need to connect the amplifier terminals with the other identical terminals present on the multicolor RGB controller. For that, you will route an extra wire from the connecting wire of the multicolor RGB controller and to connect it to the designated port on the amplifier concurrently.

If you want to power the LED strips with different power supplies, you may require additional power adaptors. during this configuration, you just must route the ability cables coming from the LED amplifier to their designated power supply unit’s ports rather than connecting them with the identical cables present on the primary power supply. ensure you carefully connect the positive terminal with the red cable and also the negative terminal with the black cable.

Connecting LED Strip Lights nonparallel


LED strip lights surely look very attractive and alluring once it’sproperly installed. But, you’ve got to follow a somewhat tedious procedure to put in the LED light strips correctly. the method may be a bit more complicated if you have got opted for RGB LED strips rather than one color option. Fortunately, there are many additional components available that may prevent the difficulty of manual work while installing these LED lights.

Today, we’ve checked out all of the required steps that require to be taken while installing LED strip lights. If you follow our guidelines carefully, we are sure that you simply can install these lights easily without having any extra additional help. Also, you’ll be able to reach us via the comment section if you’ve got trouble regarding the installation of LED strip lights.

Leave a Reply

Your email address will not be published. Required fields are marked *