LED Strip Lights are one in all the simplest things happened within
the lighting world. you’ll use them to embellish your art, home, light kitchen
countertop, add as a staircase lighting or roof lighting for festive season.
Since they are available in long strips, you’ll cut them into desired lengths
and also connect them together to extend the length.
We already saw the solution to “Can you chop LED Strip Lights?” in an earlier guide. during
this guide, we’ll see the way to connect LED Lights together.
Outline
Introduction
Can You Connect Multiple LED Strip Lights Together?
How to Connect LED Lights Together?
Solder Two Strips
Use Connectors
Keep an eye fixed on the facility Supply
Conclusion
check this articles also:
Introduction
One of the most reasons for the recognition of LED Strip Lights is that you
simply can easily set the length of strip you wish. you’ll easily cut the LED
Strip to perfectly fit the kitchen countertop otherwise you can connect
another strip to the present one to hide your entire roof for season.
LED Strips are available as a single-color options (Green, Red, White, Blue, etc.)
where all the LEDs within the strip are of same color. they’re also available
as fancy RGB, where you’ll be able to use a tiny low device to line the
color you like, adjust brightness and also set the different
modes like flashing, fading or running LEDs.
Some LED Strips include weather proof coating (some form of silicon layer
on top of the particular LED strip to create it waterproof). you’ll use these
strips outdoors with any concern about the weather. There are LED Strips
that are meant just for indoor use.
The popular length for LED Strips lights is 5m (slightly over 15- 16feet). But you will be able to also get smaller LED Strips (as in Car LED Strips) or bigger spool
of LEDs that are over 50feet long.
check this articles:
Can You Connect Multiple LED Strip Lights Together?
The answer is yes. But there are some stuff you have to make sure of. we
are going to see about them as we progress.
If you already cut the LED Strip before and you wish to re-connect them
back to the identical strip, then you don’t should worry about the rest.
All you’ve got to try and do follow anyone of the methods we mentioned
below here and continue using extended LED Strip Lights.
Obviously, you can’t connect two dissimilar LED Strips i.e., if one may be
a single-color LED Strip and therefore the other is an RGB LED Strip. during
this case, the LED Strips are completely incompatible with one
another and you can not connect them together
different brands, what to try to to then? If they’re compatible with one another i.e., both of them have
same layout and also both are rated for same voltage, them you’ll be able to connect two LED Strips from different brands.
Voltage is another important thing to think about before connecting LED
lights together. Because some led strips lights operate at 5V DC while some led strips
operate at the more popular 12V DC. There are strips that operate at higher
voltage like 24V but 12V strips are extremely popular.
How to Connect LED Lights Together?
After ensuring that both the LED Strips you would like to attach are
compatible with one another and operate at the
identical voltage, you’re now able to connect them.
But the question is: a way to connect LED Lights Together?
There are a pair of how using which you’ll connect LED Strip Lights together.
One is that the good old-fashioned soldering and therefore the second is
using fancy LED Strip Connectors.
Let us see the way to connect LED lights together using both these methods
one-by-one.
Solder Two Strips
Connecting two Led Strips lights through soldering can very easy or
difficult counting on your skill level. If you’re at home with soldering and
have the required tools/equipment and hands-on experience, then we
recommend this method.
Before you solder, check polarity of the copper pads on the LED
Strips. just in case a straightforward single LED Strip, you have got just two
pads: one for positive supply and therefore the other for negative
supply. confirm that you just connect the positive of 1 strip to the positive of
the second led strip lights and same with negative.
check this:
Apply touch of solder on all the copper pads. Slightly overlap one strip
over the opposite and solder them together. it’s very simple.
If you’ve got an RGB LED Strip and need to attach to a different compatible
RGB LED Strip, then you wish to be a touch more careful.
this is often because, any typical RGB LED Strip will have four copper pads, within
the same area because the two copper pads, which was the case with
single-color strip.
So, the dimensions of copper pads becomes slightly small and this makes
soldering a tad bit difficult (but not impossible). As usual, you’ve got to
align the pads on both the LED Strips. The soldering becomes easy if you
employ the proper soldering tip.
None the less, the tactic is same for both single-color and RGB Led Strips:
check for the compatibility of the led strips, align copper pads properly (and
correctly) and solder them together.
Use Connectors
Now, we are going to see a simple thanks to connect LED Strips using
connectors. That’s right. you’ll be able to buy LED Strip Connectors. looking
on the kind of LED Strip i.e., single-color LED Strip (with two copper pads) or
RGB LED Strip (with four copper pads), browse for appropriate LED Strip
Connector.
As far as we all know, there are three variants of connectors. the
primary one may be a clamp style connector clip. They simply clamp both
the LED Strips together and canopy them with a flip cover. With this style,
the connection between two LED Strips will look seamless as if they were
actually one strip.
For the second type, we’ve connector clips with pins on each side and a tiny
low cable within the middle. This variant is extremely useful if you wish to
form angles with the LED Strips or avoid any obstacles.
The third variant has connecting clip only 1 end of the cable while the
opposite end is simply exposed wire. This connector is beneficial at the
starting (or ending) where you would like to attach the strip with power
supply.
Keep a watch on the ability Supply
We already mentioned about voltage within the previous section. Another
important thing you wish to think about is that the wattage of the
ability supply.
For example, assume you’ve got an LED Strip (full 5meters) that
attracts about 24W of power. Now, if you wish to feature another full-length
strip to the primary one, then the overall power draw would be 48W.
So, you wish to create sure that your power supply can deliver this power.
Assuming 20% headroom, you would like an influence supply which
will deliver a minimum of 58W of power. So, a secure bet would be a 60W
power supply.
Most LED Strip manufacturers mention the ability consumption number on
their packaging or on their website. Definitely consider those number and
use a correct power supply to avoid any mishaps.
Conclusion
LED Strips lights can easily increase aesthetic values of an
subject/object. you’ll be able to use them in cars, computers, in homes,
offices, to embellish art, light kitchen and plenty of other places.
The good thing about LED Strips is that you simply can easily cut them into desired length and also add extra/additional strips to extend the length.
But a very important question that you justmay need while connecting LED Strips
is: the way to connect LED Lights together? during this guide, we
saw number of simple ways you’ll be able to connect LED Strips.