LEDs are undoubtedly an amazing modern-day replacement of tube lights and incandescent bulbs. LED lights are both energy efficient and brighter than their predecessors.
Also, you’ll expect a extended generation from LED lights. But there are some downsides to LED lights moreover.
Flickering light, humming sound being some common problems of LED Lighting. If you wish to understand what more problems can LED lights cause, then read along.
Outline
1. LED Light Flickering
2. LED Buzzing or Humming Noise
3. Too Bright light
4. LED Light Too Dim
5. LED Light Stopped Working
6. LED Flashes on and so explodes
7. LED Dimming doesn’t work
8. LED Strip Showing the incorrect Color
9. Recessed LED Light Turns Off after some Seconds
10. Random put off LED Recessed Light
11. LED Light Attracts Bugs
12. LED Light Overheating
13. LED Light Burning Out
14. Wrong LED Beam Angle
15. Blue Light Pollution of LED
16. Using LED Light in an Incandescent Light Fixture
17. Using LED Light at an additional High Current/Wattage
18. Low Color Rendering Index
19. Wrong LED Driver
20. Corn Bulb Protrudes Out of the Lampshade
Conclusion
1. LED Light Flickering
LED Light Flickering
One of the foremost common and frequent problems with LEDs is flickering. during this case, the LED bulbs flickers, sometimes continuously, while sometimes, it happens randomly. the foremost common reasons behind this are poor capacitors or low wattage.
Sometimes, LEDs are connected with devices like washing machines, dryers, etc., which take up maximum wattage. And this leaves the LED with inadequate wattage resulting in flickering. to repair this issue, you wish to test the socket. If the socket is okay, you’ll replace the bulb or contrariwise.
2. LED Buzzing or Humming Noise
LED Buzzing
Buzzing sound is another common issue with the LED Lighting. It’s actually because of overload within the circuit.
If your LED bulb is receiving slightly higher voltage, it’ll produce a humming sound rather than blowing off. When the voltage rises, the electronic parts vibrate, causing the fuming sound.
The best solution is to match the voltage that runs through your socket with what your bulb or lamp accepts. It’ll most likely solve the matter.
3. Too Bright light
LED Too Bright light
Sometimes LEDs become too bright for your liking. And it may be because of two reasons. the primary one is that that the bulb is getting more wattage than required. Secondly, it can happen because you would possibly have gotten a Kelvin temperature bulb,which may sometimes be too bright.
If your bulb is dimmable, install a switch to manage this feature. Or use a fixture that may prevent extra light from reaching your eyes.
4. LED Light Too Dim
LED Light Too Dim
A dim LED are often quite irritating. it always happens either when the LED gets too old or when it’s poorly designed. LEDs have a era, so before dying out completely, it’s normal to lose brightness. In such a case, you must replace the LED with a replacement one.
5. LED Light Stopped Working
LED Light Stopped Working
Sometimes the LEDs close up altogether. This usually happens thanks to a brief circuit or when the LED has become too old. you’ll be able to dig checked by an electrician or just replace it with a replacement one.
6. LED Flashes on then cracks
It happens because of faulty fixture drivers. Sometimes, the voltage supplied to the LED is quite what it requires. And this makes the LED flash then blast off. If you face this issue, it’s better to call a technician.
7. LED Dimming doesn’t work
LED Dimming doesn’t work
There is several reasons behind this happening. Your bulb might not be dimmable. Or the fixture isn’t meant for dimmable LED bulbs. you’ll latch on checked by an electrician and diagnose the matter. you’ll be able to buy a replacement bulb if it wasn’t dimmable or can replace the fixture.
8. LED Strip Showing the incorrect Color
RGB LED strips are meant to indicate different colors. But if you notice the incorrect colors, it’s a controversy. It happens as there may well be a wrong wire connection. Or there’s a fault within the LED controller. However, you’ll check the wiring and replace it if there’s no fault within the wires.
9. Recessed LED Light Turns Off after some Seconds
When an excessive amount of heat builds up, the LED can pack up. It happens after you install LEDs within the recessed light nooks, which aren’t well spaced for LEDs. In such cases, you’ll be able to install a brand new holder socket for your LED.
10. Random put off LED Recessed Light
A recessed fixture isn’t simple to permit the free movement of air. And if you put in an LED within the place, this problem can occur. It’s because LED needs air to stay itself cool. When that doesn’t happen, it heats up and turns off.
11. LED Light Attracts Bugs
LED Light Attracts Bugs
Insects/Bugs are only interested in certain styles of wavelengths. But it can happen with LEDs if the Kelvin favors them. Anything above or below this range 2000K-5500K can attract insects. So, confirm that you simply buy LEDs lying within the above range.
12. LED Light Overheating
It happens after you install LEDs in old fixtures meant for recessed lights. Such fixtures are congested and don’t allow air to pass, which might cause this issue. you’ll upgrade to IC-rated recessed Lighting. It offers better air circulation, which can prevent overheating of LEDs.
13. LED Light Burning Out
Poor quality LEDs with no warranty usually cause this issue. and also the solution is easy, and you’ll be able to replace the LED with a branded one from a reputable brand with a guaranty.
14. Wrong LED Beam Angle
Different LEDs are meant for various purposes and are available with a Beam Angle. If you would like to use LEDs as a floodlight and face the incorrect Beam Angle, you would possibly have bought the incorrect kind of LEDs. during this case, replacing is that the best decision.
15. Blue Light Pollution of LED
LEDs with higher Kelvin levels are brighter and have higher levels of blue light. you must choose a light-weight with a hotter spectrum or encompasses a lower rating on the Kelvin chart in such cases. it’ll have less blue light, which won’t disturb your eyes.
16. Using LED Light in an Incandescent Light Fixture
Most of the time, LEDs function well in incandescent lighting fixtures. But thanks to limited air supply, the LEDs can heat up and switch off. Also, the dimming feature won’t function when an LED is installed in an incompatible fixture. In such cases, you ought to replace the fixture with a compatible one.
17. Using LED Light at an additional High Current/Wattage
Incandescent lights become more or less bright with wattage. But this doesn’t happen with LEDs. In an LED, what matters is that the Lumen. So, when you’re buying an LED with the identical wattage because the fixture, it’d not work. So, convert the wattage into lumens and choose the one with the proper lumen rating.
18. Low Color Rendering Index
If the CRI is lower, whatever you see within the Lighting are less bright or less clear. it’s just like photography. Although 80 CRI is sweet, you’ll buy a LED with a 90+ CRI rating for brighter and more saturated light.
19. Wrong LED Driver
Every LED light comes with drivers, which is to blame for supplying the facility and run successfully. However, if the LED is incompatible with the motive force, you’ll be able to face problems just like the LED turning off thanks to overheating, burning of LED Driver. In such cases, you must compare the drivers and buy a compatible one.
20. Corn Bulb Protrudes Out of the Lampshade
Corn bulbs are available in different shapes and sizes. Sometimes, they’re too long or large to suit within the fixtures, which might cause them to protrude out. this may reduce the lifespan and might also make it look absurd. So, buy a bulb that’s compatible along with your lamp.
Conclusion
Here ends our list of common LED-related issues that you just might encounter. we’ve got tried to hide almost every issue out there. the simplest solution is to contact the retailer or a technician if you face another problem.
However, if you would like to avoid the above problems, you must choose a branded LED with the right wattage, size, and drivers. this can ensure longer and problem-free usage.