Can You Cut LED Strip Lights?
LEDs are slowly becoming the norm for all styles of lighting requirements,
whether it’s for lounge, outdoors, kitchen, automobiles etc. you’ll be able
to find LED lighting in several form factors like regular incandescent looking
bulbs, LED Tubes (which look like fluorescent) flood lights,
street lights and LED Strips.
you able to Cut LED Strip Lights? we’ll discover more about the
identical during this guide.
Outline.
A Brief Note on LED Strip Lights
Can You Cut LED Strip Lights?
How to Cut LED Strip Lights?
Measure the Length
Look for Copper Pads (or a scissor logo)
Cut the LED Strip Light
Conclusion
Can-You-Cut-LED-Strip-Lights.
What this suggests is that those three LEDs are nonparallel with a current
limiting resistor and act as an independent set with relation to the
remainder of the LEDs within the strip.
All the LED Sets (a set consists of three LEDs and a resistor) are literally in parallel with one another. So,essentially you’ll be able to cut after every LED Set.
NOTE: This description of three LEDs asynchronous with a current limiting resistor is simply an example. counting on the kinds of LEDs and other
factors, this layout will change from one manufacture to other.
How to Cut LED Strip Lights?
Let us now see how you’ll cut an LED strip light. we’ll take the
identical example as before i.e., an LED Set of three LEDs within the strip.
Measure the Length
First, measure the proper length of the LED Strip you would like. reckoning
on your application, you will need a foot, a meter, or the other length.
Look for Copper Pads (or a scissor logo)
Now comes the critical part. Most LED strips include exposed copper pads
after each LED Set (one parallel group). this is often where you’ve got to
chop the LED Strip Lights. Some LED Strip Lights even have a scissor logo
printed on these copper pads indicating the situation to form a cut.
Cut the LED Strip Light
After finalizing the length of the LED Strip, check whether you have
got access to copper pads within your length requirements. If not, then we
propose you to use the following copper pad slightly outside your required
length.
Now, take a pair of safety scissors and cut right within the middle of the
copper pad. this is often important as you’ll have enough copper for both
the LED Strips just in case you wish to connect a strip within the future or
solder power supply wires.
Conclusion
LED Strips are a trendy way of lighting your cars, computers, staircases,
kitchen countertops, home theatres and plenty of other
areas. they’re available in single color, RGB with remote, individually
addressable LEDs and a few even include “smart” connectivity. But one
question that pops up now so with relevance LED Strips (especially
if you’re new LED Strips) is that may you chop LED Strip
Lights? we’ve seen that you just can easily cut LED lights and that we also
saw the straightforward steps to follow while cutting them.